EUROREPAR TECHNICAL FLUIDS

Development department development@cars-tech.pro

Select language

EUROREPAR
TECHNICAL FLUIDS

EUROREPAR BRAKE FLUID

The brake fluid ensures correct operation of the vehicle's braking system and is an important part of the vehicle's active safety system.

Brake fluid is a mixture of glycolic esters with a high boiling point. It has a high temperature resistance – up to 165 degrees and retains its viscosity and properties even in severe frosts.

Complied with automakers' standards

EUROREPAIR BRAKE FLUID RANGE

The main function of this fluid is to protect the brake system from moisture and corrosion. Nevertheless, over time even a high–quality brake fluid collects water losing its original properties and needs regular replacement.

There are several standards of brake fluids that differ in density and frost resistance. The requirements of the automaker for the type of brake fluid are prescribed in the service instructions of the car. DOT4 class 6 is the most common standard and such brake fluid is present in the range of Eurorepar ™ technical fluids.

Order the product

Check availability

BENEFITS

STANDARDS

Complied with DOT, SAE, FMVSS standards

RELIABILITY

Guarantee of proper operation of ABS (anti-lock braking system) and stabilization systems

HEAT RESISTANCE

High boiling point

VISCOSITY

Low viscosity at subzero temperatures

HYGROSCOPICITY

Low aggressiveness and hygroscopicity

EUROREPAIR BRAKE FLUID RANGE

EUROREPAR ™ DOT4 BRAKE FLUID

DOT4 low viscosity liquid for modern cars equipped with the latest generation ESP systems.

It is used in all climatic zones at ambient temperatures from – 50 ° C to + 50 ° C in accordance with the service instructions of automotive manufacturers. Fully complies with the requirements of international standards SAE J 1703 and FMVSS No. 166 for brake fluids of DOT3, DOT4 classes.

Articles and names:

SLM020526N Eurorepar ™ DOT 4 brake fluid; 1 l.
SLM020525N Brake fluid Eurorepar ™ DOT 4; 0.5 l.

EUROREPAR ™ DOT4 CLASS 6 BRAKE FLUID

Low-viscosity liquid DOT4 class 6 for hydraulic brakes and clutches of modern cars.

It is used in all climatic zones at ambient temperatures from – 50 ° C to + 50 ° C in accordance with the instructions of automotive manufacturers. Fully complies with the requirements of international standards for low-viscosity brake fluids of class DOT 4 class 6 (SAE J1704, ISO 4925, FMVSS 116).

Articles and names:

SLM020529N Eurorepar ™ DOT 4 class 6 brake fluid; 1L.

COOLANTS

EUROREPAR CAR ANTI-FREEZE

In addition to heat removal the automotive anti-freezes also protect the elements of engine parts and cooling systems from corrosion and cavitation. Requirements for high-quality anti-freeze: chemical stability, good thermal conductivity. They do not freeze at low ambient temperatures, do not boil at engine operating temperatures, protect the surfaces of the cooling system from deposits formation and parts and components of the entire system in general. Antifreezes have as a base a mixture of water and monoethylene glycol as well as packages of protective additives. All this ensures non-freezing properties and guaranteed circulation of the mixture in any operating conditions. It is important to remember that only anti-freezes with the same additive base mix well.

Complied with automakers' standards

EUROREPAR ANTI-FREEZE RANGE

The Eurorepar ™ anti-freeze range meets the requirements of most car manufacturers and includes both G11 silicate antifreeze which is recommended to be replaced every 3 years and carboxylate G12 with a service life of 5 years as well as a unique DSR captive product designed specially for Peugeot and Citroёn cars.